Lorex ACSOL2 Serie Guide De Démarrage Rapide page 11

5. Loosen the wall mount's
adjustment ring by turning it
counterclockwise (see Figure 2).
6. Angle the rotating adjustment
screw 45° away from the mounting
surface (see Figure 2).
7. Twist the solar panel onto the wall
mount. Be careful not to hit the
mounting surface.
8. Adjust the angle of the solar panel
to receive direct sunlight, then
tighten the adjustment ring.
9. Use a Phillips screwdriver and
the adjustment ring screw to
secure the adjustment ring from
underneath the wall mount
(see Figure 2).
Adjustment ring
Figure 2
9