Lorex ACSOL2 Serie Guide De Démarrage Rapide page 10

Option B - Installing the solar panel and camera together
ATTENTION: The camera can be installed onto the solar panel only if the camera is
facing the residence.
block the wireless signal. We recommend installing the solar panel and camera separately, see
pages 5-7.
1. The solar panel is designed to
maintain the camera battery pack's
charge. Make sure to first charge the
battery pack using the micro USB
cable.
2. Stick the wall mount template in the
desired mounting position.
3. Drill into the wall mount template's
marked holes using the 1/4" (6mm)
drill bit. If attaching to masonry,
gently tap four anchors into the holes.
4. Secure the wall mount using four
screws (see Figure 1).
If the camera is installed backing onto the residence, the wall mount may
Figure 1
8