GE 21 Manuel D'utilisation page 27

REPLACING THE FREEZER DRAWER
Two people may be required to complete
this procedure.
TOP DRAWER
ATTACH AND SECURE THE DRAWER
1
FRONT TO THE SLIDES
A Pull out the rail assemblies to the full length on
each side of the cabinet.
Drive the bottom outside screw into the drawer
B
on each side until it is all the way in.
Screw
Drive the remaining 3 screws on each side
C
all the way into place (there are a total
of 8 hex-head screws).
Screws
Installation Instructions
27
(on double drawer models)
REPLACE THE FREEZER BASKET
2
Tilt the basket back and lower it down into
the drawer. Rotate the basket to a horizontal
position and press it down into the 4 alignment
tabs on the rails.
Tab