IMPORTANT SAFETY INFORMATION
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE
FCC RADIO FREQUENCY INTERFERENCE
This equipment generates and uses ISM frequency
energy and if not installed and used properly, that is in
strict accordance with the manufacturer's instructions,
may cause interference to radio and television reception.
It has been type tested and found to comply with limits
for an ISM Equipment pursuant to part 18 of FCC Rules,
which are designed to provide reasonable protection
against such interference in a residential installation.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause interference to radio or television reception, which
can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference
by one or more of the following:
How to Remove Protective Shipping Film and Packaging Tape
Carefully grasp a corner of the protective shipping film
with your fingers and slowly peel it from the appliance
surface. Do not use any sharp items to remove the film.
Remove all of the film before using the appliance for the
first time.
READ AND SAVE THESE INSTRUCTIONS
49-80781 Rev. 2
■ Reorient the receiving antenna of radio or television.
■ R elocate the Microwave oven with respect to the
receiver.
■ Move the microwave oven away from the receiver.
■ P lug the microwave oven into a different outlet so that
microwave oven and receiver are on different branch
circuits.
The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modification to
this microwave oven. It is the responsibility of the user to
correct such interference.
To assure no damage is done to the finish of the
product, the safest way to remove the adhesive from
packaging tape on new appliances is an application of
a household liquid dishwashing detergent. Apply with a
soft cloth and allow to soak.
NOTE: The adhesive must be removed from all parts. It
cannot be removed if it is baked on.
9