Operating An Ipod Directly - Passenger Control; Searching For A Track; Searching A Track By Name - Quick-Browzer; Searching By Skip Items - Jump Mode - Sony DSX-S200X Mode D'emploi

(with the card remote commander)
1
During playback, press (2) (SHUF)
repeatedly until the desired setting
appears.
Select
Shuffle Album
Shuffle Podcast
Shuffle Artist
Shuffle Playlist
Shuffle Genre
Shuffle Device
After 3 seconds, the setting is complete.
To return to normal play mode, select "off."
Operating an iPod directly
— Passenger control
You can operate an iPod connected to the dock
connector directly. This function works when the
iPod is connected to the USB (external)
connector only.
1
During playback, press and hold
(MODE).
"Mode iPod" appears and you will be able to
operate the iPod directly.
To exit the passenger control
Press and hold (MODE).
Then "Mode Audio" will appear and the play
mode will change to "Resuming."
Notes
• The volume can be adjusted only by the unit.
• If this mode is canceled, the repeat setting will be
turned off.
To play
album in random order.
podcast in random order.
artist in random order.
playlist in random order.
genre in random order.
device in random order.

Searching for a track

Searching a track by name
— Quick-BrowZer™
You can search for a track in a USB device easily
by category.
1
Press (BROWSE).
The unit enters the Quick-BrowZer mode,
and the list of search categories appears.
2
Rotate the multi way encoder to select
the desired search category, then
press it to confirm.
3
Repeat step 2 until the desired track is
selected.
Playback starts.
To return to the previous display
Press (BACK).
To exit the Quick-BrowZer mode
Press (BROWSE).
Note
When entering the Quick-BrowZer mode, the repeat/
shuffle setting is canceled.
Searching by skip items
— Jump mode
When many items are in a category, you can
search the desired item quickly.
1
Push the multi way encoder right in
Quick-BrowZer mode.
The following display appears.
A Current item number
B Total item number in the current layer
C Item name
Then the item name will appear.
2
Rotate the multi way encoder until the
desired item or one near the desired
item appears.
It skips in steps of 10% of the total item
number.
continue to next page t
21