Rm-X172 Card Remote Commander - Sony DSX-S200X Mode D'emploi

RM-X172 Card Remote
Commander
1
OFF
2
SOURCE
3
MENU
4
5
6
DSPL
REP
1
4
7
Remove the insulation film before use (page 6).
A OFF button
To turn off; stop the source.
B SOURCE button*
To power on; change the source (Radio/
USB/SensMe™*
C </, (SEEK –/+) buttons
The same as pushing the multi way encoder
left/right on the unit.
D MENU button
To enter menu.
E ENTER button
To apply a setting.
F DSPL (display) button
To change display items.
G VOL (volume) +*
To adjust volume.
H ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
I SOUND button
To enter sound setting.
10
8
ATT
9
SOUND MODE
0
/CAT
qa
+
qs
ENTER
–
qd
SCRL
SHUF
2 3
qf
PAUSE
5 6
+
VOL
–
1
2 ).
3 /– button
J MODE button
Press to: Select the radio band (FM/AM)*
switch between internal/external USB
devices (USB).
Press and hold to: Enter/cancel the passenger
control* 4 .
K
(BROWSE)/CAT*
To list up (Radio); enter the Quick-
BrowZer™ mode (USB).
L M/m (+/–) buttons
The same as pushing the multi way encoder
up/down on the unit.
M SCRL (scroll) button
To scroll the display item.
N Number buttons
USB:
(1): REP page 15, 20
(2): SHUF page 15, 20
(6): PAUSE
To pause playback. To cancel, press
again.
Radio:
To receive stored stations (press); store
stations (press and hold).
*1 If an HD Radio tuner or SAT tuner is
connected:when (SOURCE) is pressed, the
connected device ("HD," "XM" or "SR") will appear
in the display.
Furthermore, if (MODE) is pressed, you can switch
the HD Radio tuner band or SAT tuner band.
*2 When a USB device set up for the SensMe™
function is connected.
*3 This button has a tactile dot.
*4 When an iPod is connected to the USB (external)
connector.
*5 When the SAT tuner is connected.
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless (SOURCE/OFF) on the unit is pressed to
activate the unit first.
1 /
5 button