Recording Modes - Defender STEALTH1 Manuel D'instructions

RECORDING MODES

There are three different recording modes available: MANUAL, CONTINUOUS, and MOTION DETECTION.
• MANUAL Record
Start and stop recording anytime manually. Press the RECORD
recording.
• CONTINUOUS Record
Schedule a START and STOP time to record; the DVR will CONTINUOUSLY record during the preset time.
• MOTION DETECTION Record
Preset a time to record only when movement is detected. MOTION DETECTION will START RECORDING when
movement is detected and exceeds a preset motion detection threshold. (See MOTION DETECTION
SETUP Pg. 12 for more information)
STOP RECORD
• Pressing the RECORD
MANUAL RECORD.
• Pressing the RECORD
START/STOP RECORDING:
Manual Record
To start MANUAL recording press the RECORD
recording and resume to SCHEDULE mode.To completely stop all recording, you must shut the schedule record off.
Motion Detection Record
Once motion detection has been set in the schedule record section of the menu, the DVR will start recording every
time motion is detected. To completely stop motion detect recording, you must shut the schedule option off.
Continuous Record
Once continuous record has been set in the schedule record section of the menu, the DVR will start recording using the
continuous record settings. To completely stop recording, you must shut the schedule option off.
If there are multiple recording modes set to record at the same time, the DVR will record using one mode, based on
the level of importance.
The order of importance is:
1. Manual Record
2. Motion Detection
3. Continuous Record
STEALTH1
All manuals and user guides at all-guides.com
button while in SCHEDULE MODE will interrupt recording and switch to
button again, and it will return you to SCHEDULE mode (if a schedule is set).
button. Pressing the RECORD
Note: For more information see reCorD SeTuP on Pg 13
button to start recording. Press again to stop
button again will stop MANUAL
12