Remote Control Preparation; Remote Control Operation - HIGH ONE 969588 Guide D'utilisation

A
TO BEGIN

REMOTE CONTROL PREPARATION

BATTERY INSTALLATION
Install the batteries as the following pictures. Be sure + and – terminals are
positioned as indicated in the battery compartment (Fig1).
SERVICE LIFE OF BATTERIES
- The batteries normally last for one year although this depends on how often the
remote control is used.
- If the remote control fails to work even when it is operated near the player, replace
the batteries.
- Use two size AAA dry batteries.
NOTE:
● Do not drop, step on or otherwise impact the remote control. This may damage
the parts or lead to malfunction.
● If the remote control is not going to be used for a long time, remove the
batteries.
REMOTE CONTROL
OPERATION
Point the remote control from no more
than about 6m from the remote control
sensor and within about 60°of the
front of the player (Fig2).
NOTES:
- The operating distance may vary
according to the brightness of the
room.
- Do not point bright light at remote
control sensor.
- Do not place objects between the
remote control and the remote control
sensor.
- Do not use this remote control while
simultaneously operating the remote
control of any other equipments.
12 EN
Fig1
Push
Open
Press
Fig2
Remote Control
Sensor