Starting The Engine - All-Power APE7210 Mode D'emploi

4-4 Exhaust Direction
To prevent the exhaust from flowing into the air cleaner
assemble an exhaust siphon on the case of the muffler
NOTE
• Prevent the water from accumulating in the
exhaust syphon from flowing into the muffler

5. STARTING THE ENGINE

5-1 Manual starting:
• Start the engine according to the following Procedures:
1. Open the fuel cock
2. Turn the governor lever to" STARTING" position
3. Hold the recoil starter handle
A. Pull the starter handle until you feel the resistance,
Then return the handle slowly.
All manuals and user guides at all-guides.com
7
B. Press the decompression lever to "Non-compression"
position. The lever will return back automatically after the
engine started
C. Hold the recoil starter handle with two hands and
pull it swiftly
D. It is difficult to start the engine in cold weather. Remove the
rubber plug on the cylinder head and fill with 2 CCʼs of
engine oil before starting.
• Always screw on the rubber plug on the cylinder head except when filling, to prevent
the rain and dust from flowing into the engine body.
NOTE
8