All-Power APE7210 Mode D'emploi page 10

1. Replace Engine Oil
Drain out the engine oil while the engine is warm and refill with recommended engine oil.
Ambient temperature Vicosity
SAE 15W-40 Semi Synthetic Oil
SAE 15W-40 Semi Synthetic Oil
SAE 15W-40 Semi Synthetic Oil
Replace Engine Oil Intervals
First time 20 hrs
th
Second time Every 100 hrs
2. Clean Engine Oil Cleaner
Screw off the bolt and take out the engine oil cleaner.
C e l n a E e v y r 1 0 0
Replace Every 1000 hrs
3. Replace the air cleaner
A. Paper element:
Replace the element every 500 hrs.
All manuals and user guides at all-guides.com
h s r
JD178F(A)/JD186F(A)(APE7210)
17
2.SAFETY LABEL LOCATION
CAUTION
• If the element is too dirty, the air flow will be blocked and starting will be hard, thus insufficient
output will result, further more, it will cost both fuel oil and engine oil, the Engine will exhaust
black smoke.
• Running engine with worn element or without element is not allowed.
B. Oil-soak Type Element
• Check the engine oil level before running the engine.
• Refill the engine oil to the upper level. Replace if it is too dirty. Clean the the element often.
4. Clean the Fuel Oil Cleaner
Remove the fuel oil cleaner from the tank and clean it often.
Clean Every 500 hrs
Replace Every 1000 hrs
A. Completely drain out the fuel oil.
B. Screw off two nuts and take out the fuel oil cleaner.
5. Screw on the bolts on the cylinder head.
This operation requires special tools, please contact service center.
6. The adjustment of fuel nozzle and fuel injection pump and the
replacement of the valve seats, parts require special technology,
please contact service center
18