Technaxx TX-SW7HR Manuel D'utilisation page 21

Stopwatch
Swipe left from the start screen and then down twice, until you
see this icon. Tap this icon to enter this option.
Press play button to begin. Press the round arrow for a lap time.
To zero the stopwatch press the pause and round arrow button.
Swipe left before pressing round arrow button for reset to see the
lap counter and every single laptime.
QR-Code
Swipe left from the start screen and then down twice, until you
see this icon. Tap this icon to enter this option.
Now you see a QR-Code. Scan it with the FunHealth App to pair
the device with your Smartphone and the Fun Health App.
Settings
Short way: Swipe up from the start screen and tap on the gear
icon.
You can also enable Do not disturb mode (moon), change
brightness (sun), lock your screen (lock), go to the settings (gear)
and find your phone (phone).
Long way: Swipe left from the start screen and then down twice,
until you see this icon. Tap this icon to enter this option.
Here you can see the set the brightness, the screen on time,
strength of vibration, sedentary, reset the watch and see the
system information under about.
Power-Off
Hold down the button (2) for 3 seconds (display needs to be on). The
smartwatch shows the option Restart or Power off. Press restart to
restart the watch. Choose power off to power off the watch. If you do
not choose either of the two options the start screen appears again.
Hints
⚫ Bluetooth connection becomes disconnected when the device
exceeds a certain distance. ⚫ Reconnect with Bluetooth if Bluetooth
does not work for more than 5 min. ⚫ Before binding the bracelet to
another account, you need to unbind it with the current account and
Smartphone. ⚫ If the bracelet cannot be illuminated, connect the
bracelet to the charger.
9