Franke FMW 250 CR G Mode D'emploi page 52

1. Press "Weight/Time Defrost"
2
2. Press one of the buttons to select the defrost time so that the LED display shows "5:00".
3
3. Press "Microwave"
3
4. Press "Microwave"
5. Press "Start+30Sec./Confirm"
2
6. Press one of the buttons to adjust the cooking time until the LED display shows "7:00".
7. Press "Start+30Sec./Confirm"
the start of the first phase and the defrost time will start counting down; the acoustic signal will
sound a second time as soon as the second cooking phase begins. When cooking is complete
the acoustic signal will sound five times.
All manuals and user guides at all-guides.com
1
twice and the LED display will show "dEF2".
once and the display will show "P100".
2
again or use the buttons to select 80% microwave power.
3
to confirm and the LED display will show "P 80".
3
to start cooking: the acoustic signal will sound once to signal
52
8. Multi-phase cooking
Setting a combination of two
different types of cooking
At least 2 cooking phases can be set. When
cooking in several phases, if one is defrosting,
this process will be carried out as the first
phase.
The available programmes are:
MICROWAVE + GRILL/COMBI
GRILL/COMBI+ MICROWAVE
WEIGHT/DEFROST+MICROWAVE
TIME/DEFROST+MICROWAVE
TIME/DEFROST+GRILL/COMBI
AUTO-MENU cannot be selected in multi-stage
cooking.
Example: If you want to defrost food for
5 minutes, then cook at 80%
microwave power for 7 minutes,
proceed as follows: