Trust 18693 Guide D'installation Rapide page 4

Bluetooth Audio Speaker - USER'S MANUAL
Installation
A On/ Off switch
1
B USB power input
C 3.5mm Audio input
D LED indicator: Blue flashing fast
Blue flashing slow
Green con tan
E Volume -
F Volume +
G Play, Pause/ Bluetooth pairing
H Charge LED
I 3.5mm Audio cable
J USB Charge cable
K Mini to Micro USB adapter
- Connect the USB charge cable to the USB port of your laptop or use your own micro usb power
2
adapter and 'K' to charge the speaker.
- Connect the USB charge cable to the USB power input 'B'.
- Charge the battery for 3 hours.
- Power on the speaker by switching the power switch 'A' on the rear of the speaker.
3
- Press and hold the standby button 'J' for 3 seconds.
- The LED indicator 'D' will start flashing Blue (paring mode).
If the LED indicator is not flashing blue. Press and hold the play/pause button for 5sec.
If a passcode is requested during the configuration of the device Use '0000'.
Pairing mode
Bluetooth mode
Audio input mode
2