Standard Equipment; Accessories; Machine Inspection - RIDGID SuperFreeze SF-2500 Mode D'emploi

SuperFreeze™ Pipe Freezing Unit
signed compressor with quick restart capabilities and over-
load protection. The freeze head hoses are leak-free
flexible rubber. The entire unit is in a portable steel carry
case.
Condenser
Hoses
Figure 1 – SF-2500 SuperFreeze™ Unit with Supplied

Accessories

Specifications
SF-2500
Capacity
Copper Tube: ................
Steel Pipe (Nominal): ....
Power Source ...................115V
Compressor Type .............Rotary, Hermetic, Low Back
Compressor Motor
Input Power ..................627W
Locked Rotor Amps ......46.5A
Input Amperage.............6.02A
Fan Motor
Input Power ...................18W x 2
Current Amps ................0.21A x 2
Refrigerant........................R-507
Hose Length .....................8.5 ft. (17 ft. span)
Design Pressure
Low Side........................300 Psig
High Side.......................500 Psig
Dimensions.......................W = 11"
Weight ..............................69 lbs.
115V .................................
230V .................................
NOTE! We reserve the right to alter specifications with-
out notice.
4
Label
ON/OFF
Switch
Freeze
Heads
" – 2 " 10mm – 65mm
1 / 1 /
2 2
" – 2"
1 /
2
230V
1ph, 60 Hz 1ph, 50 Hz
Pressure
505W
19.5A
2.4A
17W x 2
0.11A x 2
21 bar
34 bar
28 cm
"
L = 24 1 / 62 cm
2
"
H = 14 1 / 37 cm
2
31 kg.

Standard Equipment

The RIDGID
®
features and accessories to make pipe freezing easy.
These items include (See Figure 1) .
• Quick Grip Clamp
• Velcro Straps
with D-Ring
• Water Bottle
• Freeze Gel
• Adapter Bushings:
" CTS
3 /
4
" CTS
1 1 /
4
2" CTS
Accessories (Optional)
• SF-2500 End Adapters
" CTS
1 /
2
" CTS
3 /
4

Machine Inspection

Before each use, inspect your pipe freeze unit and
correct any problems to reduce the risk of serious
injury from electrical shock and other causes and
prevent freeze unit damage.
1. Make sure that the Pipe Freeze Unit is unplugged and
inspect the power cord and plug for damage. If the
plug has been modified, is missing the grounding
prong, or if the cord is damaged, do not use the ma-
chine until the cord has been replaced.
2. Clean any oil, grease or dirt from all equipment and
controls.
3. Inspect the Pipe Freeze Unit for any broken, worn,
Ridge Tool Company
Pipe Freezing unit comes complete with
Catalog No. 65942
1" x 16" (25mm x 40cm)
Catalog No. 69707
Catalog No. 60776
8 oz. Catalog No. 74946
" ID (38mm x 25mm)
1" OD x 3 /
4
Catalog No. 69712
" OD x 1 " ID (38mm x 32mm)
1 1 / 1 /
2 4
Catalog No. 70652
" OD x 2" ID (63mm x 50mm)
2 1 /
2
Catalog No. 69717
Catalog No. 68857
Catalog No. 68862
WARNING