Service And Repair - Bosch 1400 Serie Guide D'installation Rapide

1400 Series/8-bay IP Video Storage System
VRM Appliance offers a fully functional VRM recording solution only restricted in the number
of configurable channels. Applications that do not need the VRM software should disable the
VRM service.
3.4.1 Additional Software and Documentation
Software for configuration of hardware and software (VRM) is available on the VRM Appliance
in folder C:\Bosch\resources.
VRM Configurator: Software for easy configuration of VRM including disk array, cameras,
recording scheduler etc. Should be installed on a separate Client system, e.g. Bosch
workstation hardware.
Please note, that for all viewing related configuration tasks, e.g IVA, the VRM configurator
along with the Bosch Video SDK (available from the Bosch web site) must be installed on a
separate client system.
Documentation for Bosch DLA and VRM can be found on:
www.boschsecurity.com > select your region and your country > select Product Catalog >
start a search for your product > select the product in the search results to show the existing
documents.
3.4.2 Disabling the VRM Service
The system always comes with the VRM application preinstalled but if these are intended to
be used only as a disk array the VRM Service can be disabled:
1.
2.
To restart the service, on the Bosch VRM Appliance initial configuration window, click the
enable Bosch VRM Appliance link.
Siehe auch Section 3.3 Setting the IP Address.
3.5 Standard System Configuration
The system is delivered with the fully configured iSCSI target and 8 preconfigured LUNs.
The default target name is TG0 and holds all of the iSCSI LUNs.
The naming convention for the LUNs is VHDxx.vhd where <xx> ranges from 01 up to 08
depending on the system used. The default setup allows every iSCSI Initiator to connect to
the system.
The system comes with iSCSI Target Service enabled which is used by the preinstalled VRM
application.
3.6

Service and Repair

The storage systems is backed by a 3-year warranty. Issues will be handled according to
Bosch Support and Service guidelines. For Bosch DLA disk arrays the standard Bosch support
way of working applies.
Bosch Sicherheitssysteme GmbH
All manuals and user guides at all-guides.com
Log on to the storage system, then start the Bosch VRM Appliance initial configuration
window. The top level view of the Bosch VRM Appliance initial configuration window
displays an overview of the system's configuration and settings.
If the Bosch VRM Appliance initial configuration window is not displayed, click Start >
Run > oobe.
Select the link Disable/Enable Bosch VRM Appliance to stop/start the VRM recording
service.
Quick Installation Guide
System Setup – First Steps | en
- | V1 | 2011.03
33