Bosch 1400 Serie Guide D'installation Rapide page 28

28 en | System Setup – First Steps
2.
3.
4.
- | V1 | 2011.03
All manuals and user guides at all-guides.com
Open the Remote Desktop Connection on your client system. In the Computer box,
enter the IP Address of the disk array you want to connect to.
Default IP Address: 10.10.10.10 (port 1)
Click Connect, press Ctrl+Alt+Del (if shown), then type the default password
WSS4Bosch once the disk array login window is displayed.
On first login the desktop default settings are applied. This will take a few seconds and
the system will reboot. After system reboot, log on again and the Bosch VRM Appliance
initial configuration window will be shown. Use this program to configure the disk
array's IP Address.
Quick Installation Guide
1400 Series/8-bay IP Video Storage System
Bosch Sicherheitssysteme GmbH