Vacuum Mode; Declaration Of Conformity; Cleaning And Maintenance - GARDTECH GT10007 Mode D'emploi

VACUUM MODE

GB
Inspect the area to be worked before starting. Remove
any objects or debris that could be thrown, jammed or
become entangled in the Vacuum-Blower. Select the
NL
vacuum function using the selector lever on the side of
the machine and switch on. With the Blower/Vacuum/
Shredder resting on its wheels move the Blower/Vacu-
DE um/Shredder forwards directing the nozzle at the
debris to be collected. Alternatively with the Blower/
Vacuum/Shredder held just above the ground swing the
machine from side to side, moving forwards and
FR
directing the nozzle at the debris to be collected. Do
not force the nozzle into the debris as this will block the
suction tube and reduce the efficiency of the machine.
Organic materials such as leaves contain a large
amount of water that can cause them to stick to the
inside of the suction tube. T o reduce sticking the
material should be left for a few days to dry out.

CLEANING AND MAINTENANCE

Cleaning
1. Keep the ventilation slots of the machine clean to
prevent overheating of the machine.
2. Regularly clean the machine housing with a soft
cloth, preferably after each use.
3. Keep the ventilation slots free from dust and dirt.
4. If the dirt does not come off use a soft cloth moiste-
ned with soapy water.
5. Never use solvents such as petrol, alcohol, ammonia
water, etc. These solvents may damage the plastic
parts.
Maintenance
Our machines have been designed to operate over a
long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper
machine care and regular cleaning.
Keep all nuts, bolts and screws tight to be sure the
appliance is in safe working condition.
1. Check the collection bag frequently for wear or
deterioration.
2. Replace worn or damaged parts.
3. Use only genuine replacement parts and accessories
4. Store the appliance only in a dry place
All manuals and user guides at all-guides.com
ENVIRONMENT
Should your appliance need replacement
after extended use, do not dispose of it with
the household refuse, but in an environme-
ntally safe way.
Waste produced by electrical machine items should not
be handled like normal household rubbish. Please recycle
where recycle facilities exist. Check with your Local
Authority or retailer for recycling advice.

DECLARATION OF CONFORMITY

Product's name & reference0
GT10007/GY8900
This declaration of conformity is issued under the sole
responsibility of the manufacturer.
The object of the declaration described above is in conformity
with the relevant Union harmonization legislation:
MD 2006/42/EC
EMC 2014/30/EU
ROHS 2011/65/EU
NOISE 2000/14/EC, 2005/88/EC
Applicable harmonized standards
EN 60335-1:2012 +A11:2014; EN 50636-2-100:2014;
EN 55014-2:1997/ A2:2008; EN62233:2008;
EN55014-1:2006/A2:2011;EN61000-3-2:2014;EN61000-3-3:2013
Ningbo Vertak Mechanical&Electronic Co.,Ltd..
# 288 GuangMing Road Zhuangshi Zhenhai District Ningbo,China
8