A high pitched noise is
heard.
The parents' unit is
silent or the sound is
very low.
The appliance beeps
every 10 seconds and
the "Link" 6B and
"Power" 5B LEDs flash.
Important, if there is an electrical power cut, to operate the baby unit with batteries the
jack plug 10A must be removed.
Care
Clean the appliance with a damp cloth and do not use detergent.
Do not allow water to enter the appliances.
Environment protection first!
Your appliance contains valuable materials which can be recovered
or recycled.
Leave it at a local civic waste collection point.
The baby unit and the parents' unit are too close to
one another or the volume of the parents' unit is set
too high.
Move the parents' unit so that there is at least a
distance of 1 metre, or lower the volume by pressing
the – button 2B on the parents' unit.
Increase the volume by pressing the + button 2B on
the parents' unit.
The batteries are completely dead. Lift the parents'
unit from its base after a few minutes of charging,
and place it back. If the beep sound continues, wait
for a few minutes and repeat. If the problem persists,
replace all the batteries. They are of standard type
and are available at stores or at approved service
centres.
FR
NL
DE
IT
ES
PT
EN
EL
TR
RU
UK
PL
CS
SK
HU
BG
RO
HR
KZ
41