Maintenance And Care; Technical Data; Tips And Notes - Sygonix 1762988 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

c) Reset master or user code
Changing the master and user code is done in the same way. Make sure to program a different
code for each one. Memorise this code. If you forget these codes, the safe may only be opened
with the delivered keys.
• Press the "#START" button briefly, 8 lines appear on the LC display ("--------").
• Enter the current code (either master or user code). Correct an input mistake by pressing the "*CLEAN"
button.
The basic setting of the delivery uses the master code "123456" and the user code "1234".
• Press the "#START" key.
• The word "OPEN" appears on the display if the correct code is entered.
• Press the "*CLEAN" button within 7 seconds and 8 lines appear in the LC display ("--------").
Now enter a new code (1 - 8 digits). Correct an input mistake by pressing the "*CLEAN" button. We
recommend to program a code with at least 4 digits.
• Confirm the code with the button "#START". The display shows "INTO"; the new master or user code has
been saved.
d) Alarm sound during movement
Strong movements of the safe (e.g. opening by force or removing from the wall) triggers an alarm sound. It
can be stopped by entering the correct master or user code.
Press the button "0" to switch on the function.
Due to safety reasons, the function may not be deactivated via keystroke.
If you wish to deactivate the function, remove the batteries for several seconds and place them
back in the safe. This causes the settings for date, time, week days and the data sets for the
opening processes to disappear.
e) Setting the date, time and the weekday
• Press the button "*CLEAN" during the normal display (not while entering a code). The display for the year
starts flashing.
• Set the year with the buttons "0" (downward) or "8" (upward).
• Change to month, date, hours or minutes as well as the week day with the button "#START" and set the
desired value with the buttons "0" (downward) or "8" (upward).
Upper line: YY-MM-DD = year-month-date
Lower line: HH-MM = hours-minutes; additionally, the week day (Monday Sunday).
• The setting mode is automatically completed each time you do not press a key for about 3 seconds. The
settings are saved.
f) Display data sets for the opening processes
The safe saves the last 14 successful opening activities in one data set including date and time as well as
the used code. You may display these as follows:
• Press the "#START" button briefly, 8 lines appear on the LC display ("--------"). The display light is
simultaneously activated.
• Enter either the master code or the user code. Correct an input mistake by pressing the "*CLEAN" button.
Confirm the code with the button "#START".
• If the code is correct, the display shows "OPEN" and an acoustic signal appears.
• If the display "OPEN" disappears but the display light is still activated, press the button "0" immediately.
Now the date (YY-MM-DD = year-month-date) and subsequently the time (HH-MM = hours- minutes) of
the last opening activity are displayed.
In addition, "PASS1" is displayed for the user code and "PASS2" for the master code.
The first displayed data set corresponds to the current date/time and the currently used code
type.
• To show the next data set, press the "0" button exactly when "PASS1" or "PASS2" is displayed. Or else, the
display mode is automatically terminated.
g) Reset master und user code to factory setting
• Initially, open the safe door as described above.
• A key button is hidden at the back of the safe door (close to the door axis on
the inside of the door), see circle in the image to the right.
• Press the key button briefly; the display shows "CLEAR".
The master code and the user code are now reset to the factory setting.
Master code = 123456
User code = 1234

Tips and notes

• The product is suitable to store valuables or to protect them from unauthorised access.
The burglar protection is achieved through its construction; e.g. via the steel plate casing and the
construction of the door as well as the applied electronics with access code. Unauthorised access to the
items in the safe is thereby impeded.
• Ensure that you are not being observed by anyone while opening/locking the safe.
• The thick door which contains the locking mechanism does not allow the availability of the entire internal
space of the safe. Carefully close the door, do not use force! This could cause the items inside the safe
to be damaged.
• Never store the two delivered keys inside the safe. It will be impossible to open the safe, if you forget your
master or user code!
• If you have forgotten your master or user code, open the safe with the key delivered and reprogram a new
master or user code.

Maintenance and care

• Apart from the occasional battery change, the product is maintenance free.
• The safe should only occasionally be cleaned with a clean, soft, dry cloth. Never use aggressive cleaning
agents or chemical solutions as the surface of the housing could be damaged (discolourations).
Disposal
a) Product
Dispose of an unserviceable product in accordance with the relevant statutory regulations.
Remove the inserted batteries and dispose of them separately from the product.
b) Batteries and rechargeable batteries
As an end user, you are legally obliged (battery directive) to return all used batteries/rechargeable batteries;
disposal in the household waste is not permitted.
Batteries/rechargeable batteries containing hazardous substances are marked with the adjacent
symbol, which indicates that disposal in the household waste is prohibited. Denotations for the
respective heavy metals are: Cd=cadmium, Hg=mercury, Pb=lead (The denotations can be
found on the batteries/rechargeable batteries e.g., under the waste bin symbol to the right).
You can return used batteries/rechargeable batteries free of charge at the collecting point of your council, in
our stores or everywhere, where batteries/rechargeable batteries are sold.
You thereby fulfil the legal requirements and contribute to the protection of our environment.

Technical data

Power supply ........................................ 4 batteries of type AA/Mignon
Dimensions ........................................... Outside: 250 x 350 x 250 mm (H x W x D)
Ouside, including turning knob 250 x 350 x 270 mm (H x W x D)
Inside: 245 x 345 x 190 mm (H x W x D)
Door opening ........................................ 183 x 240 mm (H x W)
Wall thickness ....................................... Casing: 1.5 mm; door: 4 mm
Volume .................................................. 16 l
Weight .................................................. 7.5 kg
Variations in dimensions and weight are dependent on the production technique.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights
including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represents the technical status at the time of printing.
Copyright 2018 by Conrad Electronic SE.
*1762988_v1_1018_02_dh_m_en(1)

Publicité

Table des Matières
loading

Table des Matières