Dell PowerConnect 8024 Guide De Mise En Route page 200

Would you like to setup the SNMP management interface now? [Y/N] y
To setup the SNMP management account you must specify the
management system IP address and the "community string" or
password that the particular management system uses to access the
switch. The wizard automatically assigns the highest access level
[Privilege Level 15] to this account. You can use Dell Network
Manager or other management interfaces to change this setting and
to add additional management systems later. For more information
on adding management systems, see the User's Guide.
To add a management station:
Please enter the SNMP community string to be used [public]:public
NOT:
yüksek erişim düzeyine ayarlanır. Başta yalnızca SNMPv1/2c etkinleştirilir. SNMPv3, siz
SNMPv3 için güvenlik erişimini yapılandırmak üzere geri dönene kadar devre dışıdır (örn.
Motor kimliği, görünüm vs.).
Please enter the IP address of the Management System (A.B.C.D) or
wildcard (0.0.0.0) to manage from any Management Station
{0.0.0.0}: 192.168.2.100
2. Adım:
Now we need to setup your initial privilege (Level 15) user
account. This account is used to login to the CLI and Web
interface. You may setup other accounts and change privilege
levels later. For more information on setting up user accounts and
changing privilege levels, see the user documentation.
To setup a user account:
Please enter the user name. [admin]:admin
Please enter the user password:********
Please reenter the user password:********
3. Adım:
Next, an IP address is setup. The IP address is defined on the
default VLAN (VLAN #1), of which all ports are members. This is the
IP address you use to access the CLI, Web interface, or SNMP
interface for the switch. Optionally you may request that the
system automatically retrieve an IP address from the network via
DHCP (this requires that you have a DHCP server running on the
network).
198
Başlangıç Kılavuzu
Yapılandırıldıysa, varsayılan erişim düzeyi SNMP yönetim arabirimi için mevcut en