Method 2. Connecting Wirelessly; Connecting A Tv Via Bluetooth - Samsung HW-N400 Manuel Utilisateur

• If "TV ARC" does not appear in the display window of the Soundbar main unit, confirm that the
cable is connected to the correct port.
• Use the volume buttons on the TV's remote control to change the volume on the Soundbar.

Method 2. Connecting Wirelessly

Connecting a TV via Bluetooth

When a TV is connected using Bluetooth, you can hear stereo sound without the hassle of cabling.
• Only one TV can be connected at a time.
The initial connection
1. Press the (Source) button on the right side panel or on the remote control, and then select
"BT".
2. Change "BT" to "BT PAIRING".
• When "BT READY" appears, press the
the (Source) button on the right side panel of the Soundbar for more than 5 seconds to
display "BT PAIRING".
3. Select Bluetooth mode on the TV. (For more information, see the TV's manual.)
4. Select "[AV] Samsung Soundbar Nxxx N-Series" from the list on TV's screen.
An available Soundbar is indicated with "Need Pairing" or "Paired" on the TV Bluetooth device list.
To connect the TV to the Soundbar, select the message, and then establish a connection.
• When the TV is connected, [TV Name] → "BT" appears on the Soundbar's front display.
5. You can now hear TV sound from the Soundbar.
NOTE
• After you have connected the Soundbar to your TV the first time, use the "BT READY" mode to
reconnect. See Page 8 for details.
If the device fails to connect
• If the previously connected Soundbar listing (e.g. "[AV] Samsung Soundbar Nxxx N-Series")
appears in the list, delete it.
• Press the PAIR button on the remote control or in "BT" mode, press and hold the
button for more than 5 seconds on the right side of the Soundbar to switch to "BT PAIRING" mode.
Then, select "[AV] Samsung Soundbar Nxxx N-Series" from the TV's search list.
PAIR button on the remote control or press and hold
ENG - 7
(Source)