PROPOINT 8381634 Mode D'emploi page 2

V 2.0
AIR BELT SANDER
SPECIFICATIONS
No load speed
Average air consumption
Max. air pressure
Air inlet
IMPORTANT SAFETY PRECAUTIONS
WARNING! Read and understand all instructions before using this tool. Keep this manual for the
safety warnings and precautions, operating, inspection and maintenance instructions. When using
this tool, basic precautions should always be followed to reduce the risk of personal injury and/
or damage to the equipment. Note that when this manual refers to a part number, it refers to the
parts list included. Before allowing someone else to use this tool, make sure they are aware of all
safety information.
WORK AREA
1. Keep your work area clean and well lit. Cluttered and dark areas invite accidents.
2. Operate in a safe work environment. Do not use machines or air tools in damp or wet
locations. Do not expose to rain. Do not use power tools in the presence of flammable
gases or liquids.
3. Keep children, bystanders and visitors away from the work area. Do not let them handle
tools or extension cords. No one should be in the work area if they are not wearing suitable
protective equipment.
4. Store unused equipment. When not in use, tools must be stored in a dry location to prevent
rust. Always lock up tools and keep them out of reach of children.
PERSONAL SAFETY
1. Dress properly, wear protective equipment. Use breathing, ear, eye, face, foot, hand and head
protection. Always wear ANSI approved impact safety goggles, which must provide both
frontal and side protection. Protect your hands with suitable gloves. Wear a full face shield
if your work creates metal filings or wood chips. Protect your head from falling objects by
wearing a hard hat. Wear an ANSI approved dust mask or respirator when working around
metal, wood and chemical dusts and mists. Wear ANSI approved earplugs. Protective,
electrically non-conductive clothes and non-skid footwear are recommended when working.
Wear steel toed boots to prevent injury from falling objects.
2
16,000 RPM
4 CFM @ 90 PSI
110 PSI
1/4 in.
For technical questions call 1-800-665-8685
8381634