Maintenance; Cleaning Schedule; Replacing The Filters - brondell Halo PH10-B Manuel De L'utilisateur

MAINTENANCE

CLEANING SCHEDULE

1. Proper care and cleaning of the Halo is critical to performance. The following chart shows the
recommended cleaning intervals and method for each part of the unit.
PART
Filter Cabinet
Air Intake and Outlet
Air Sensor
Mesh Pre-Filter
Carbon Filter
True HEPA Filter
* Filter life may vary according to usage and environment.
Replacement Filter Packs are available for purchase at brondell.com.

REPLACING THE FILTERS

Always remove the protective plastic packaging from the filter before installing the filter.
When it is time to change one or both of the filters, the Filter Change Indicator will activate, and
the name of the filter that needs replacing will illuminate. After replacing the filters by following
the steps on Page 12, please see Page 13 for instructions on how to reset the Filter Change
Indicator.
TIME
As needed
Every two months
Every two months
Every two to
four weeks
One year*
One year*
METHOD
Wipe with damp cloth first.
If needed, follow with a mild,
non-abrasive cleaner.
Clean with a soft brush or cloth.
Do not allow dust to fall
inside the Halo
See Page 14
Vacuum or rinse thoroughly in
warm water as needed.
Let dry before reinstalling.
Do not use heated and/or
compressed air to dry the
Mesh Pre-Filter
Replace*
Replace*
11