Filter Replacement; Cleaning & Maintaining - CYCLO 310C Instructions D'utilisation Et D'entretien

Filter replacement indicator
The RED LED of filter reset being ON continuously indicates that it is time to replace
the filter. Follow the instruction below to change the filter and reset the program.
*Combination filter will last approximately 6 months.
1. Find the lock on the base of the unit.
2. Unlock it by moving it to the left.
3. Lift up the unit.
4. Get the dirty filter out and put in a new one.
5. Set back the unit and move the lock to the right.
6. Press Power on/off button for 3 seconds to reset the firmware and the filter
replacement indicator.
The machine should be cleaned at least once every month by a clean, dry, soft
cloth. More frequent cleaning may be required depending on environmental
conditions. NOTE: Do NOT stick any foreign objects or your fingers inside the
unit. Do NOT use gasoline, benzine, thinner, harsh cleaners, etc. on and/or in the
unit while cleaning as they will damage the product. NEVER use alcohol or other
solvents.
Filter
FILTER should be cleaned once each month by vacuum cleaner. Note: Filters
should be replaced at least once each 6 months. More frequent cleaning and
replacing may be required depending on environmental conditions.

FILTER REPLACEMENT

CLEANING & MAINTAINING
17