Using Your Air Purifier; Air Quality Indicator - CYCLO 310C Instructions D'utilisation Et D'entretien

1. POWER (ON/OFF) /FILTER RESET
Soft press to turn on/off the unit. Default
working on speed II when the unit is turned
on. Note: When the unit has a cumulative
work of 4320 hours, the FILTER RESET
Indicator keeps constant light. Long press
this button for 3-5 seconds to reset Filter
Replacement Indicator.
2. TIMER BUTTON : By pressing this button, the purifier can be timed to
operate for intervals of 2, 4 and 8 hours, stopping automatically when the
selected operating time has elapsed.
3. AUTO / SLEEP MODE : Under AUTO mode, the unit will automatically
AUTO
change the speed according to the air quality detected by the dust sensor.
Press to turn on sleep mode.
Note: Under sleep mode, night light is still on.
Under sleep mode, press any button to deactivate the machine sleep mode.
4. SPEED BUTTON: There are 4 speed settings. Press the button each time
TURBO
to select (I), (II), (III) and Turbo speed. Speed I is sleep mode, select this speed
and in 10 seconds, all LED will be turned off. Note: Default working on speed II
every time the unit is turned on.
5. UVC / WIFI / ION
First, press the button to turn on the Wifi. The indicator light below the Wifi
logo will turn on. Press the button again to activate ION and a third time to
activate UVC. It is possible to have all 3 options at the same time or to use only
the UVC or ION function.
Air quality indication LED ring shows different colours in below logic:

AIR QUALITY INDICATOR

Red
Orange
Yellow
Blue
16

USING YOUR AIR PURIFIER

Heavily Polluted, PM2.5 = 0-49.9
Lightly polluted, PM2.5 = 50-99.9
Moderate, PM2.5 = 100-149.9
Good, PM2.5 = ≥150