Brush Roller Cleaning - BUTURE VC50 Mode D'emploi

• Installation steps:
1. Twist the stainless steel filter counterclockwise and put it into the dust cup.
2. Put in a sponge strainer.
3. Plug the HEPA filter into the motor.
4. Twist the dust cup clockwise to connect it to the motor.
1

6.3 Brush Roller Cleaning

Tip: After long periods of use, the bristle may be jammed by hair or similar build-up. It's
recommended to clean the brush roller periodically to ensure efficient operation and
maintain suction.
1. Press the release button upwards to remove the brush roller.
2. To take out the brush roller, and to remove any hair or fibers that have been wrapped
around the brush roller. Using the brush cleaning tool to sweep away the trash on the roller.
3. The brush roller is washable. Before replacing, check that the brush roller is completely
dry.
4. Press the brush roller to the brush head and hearing the sounds of locking.
1
EN
14
After-sales Service Email: tech-support@ibuture.com
2
2
3
3
4
4
click