Bestway Alwayzaire P3063 Notice D'utilisation page 5

1
Green light: Inflation completed, reach the desired pressure;
Green light flashing: Alarm - Can not reach the desired pressure within 5 min.
Blue light: Inflating or Deflating;
Blue light flashing: Manual Deflating.
Auto-Deflation: Press deflation button for 3 seconds.
Manual-Deflation: If air bed is not deflated completely, press the deflation button
more than 4 seconds and holding it will cause the pump to go into a
manual-deflation state (with the blue LED flash), which has a 30-second Auto-off
feature.
USB port.
Specification: DC 5V 1A
The USB port can be powered when the pump plugs into the socket.
NOTE:
When all 3 power buttons are flashing this indicates one of two things: 1) The power
is on, or 2) The power has been off and is now reconnected to a power source. This pump
has an auto-re-inflation feature. Please keep the pump plugged in and make sure the green
light is on to maintain the air pressure level that you choose.
NOTE:
Pressing the deflation button anytime will stop the pump when it is in use.
ALARM:
When the green LED flashes, this means the pump can not reach the desired
pressure after inflating over 5 min. Please follow steps below.
1. Check if there is any air leakage and ensure the air valve is closed. Unplug and re-start
the air pump.
2. If the problem continues, please manually deflate the airbed following the below steps:
• Press the deflation button for more than 4 seconds and hold.
• Or press the deflation button once to open the air valve in the pump and then deflate
by pressing the air out of the airbed. Then contact our After Sales Service Center.
2
5
3