auna multimedia Elegance ANC Mode D'emploi page 10

VOL-
4 Previous Track
Mute Call
5 Micro USB Slot
6 Mic
3.5mm Audio In
7
8 ANC Status LED
9 ANC on/off
10 ANC MIC
Switch the Elegance ANC off. Then press and hold the multi functional button (1) for 5 seconds. The red and
blue LED will flash alternately to indicate the pairing mode. Activate BT on your smart device and connect
to Elegance ANC. Type in „0000" (4 x zero) if you are prompted to fill in a password.
You can connect the Elegance ANC to two BT devices. Shut off the headphones after the first successfull
pairing (press and hold (1)) and repeat the procedure using another BT device.
To use the two devices simultaneously, press VOL+ and VOL- (3 & 4) at the same time, in order to activate
the multi point connection.
APT-X: Featuring the apt-X codec, the headsets can connect wirelessly to any apt-X enabled devices, vastly
improves the quality of BT streaming, delivering CD-quality sound.
Connect with an NFC device: Ensure that NFC is enabled on your mobile device. Then turn the Elegance
ANC on and slowly slide the NFC zone of the headset directly against the NFC device until an NFC connec-
tion is confirmed.
Charge the Elegance ANC connecting it with the supplied USB cable to either a computer USB port or to a
suitable USB AC/DC adaptor.
Continuously charge for at least 2 hours.
When connected to an iOS device, the battery status will be displayed on the display (of the iOS device).
You can connect the Elegance ANC to any audio source (like smartphones, MP3 players or the like) in the
conventional way, using the supplied 3.5mm audio cable. When using the headphone like that you do not
need to switch it on. The internal battery will not be in use. In this case you cannot use the hands free and
BT functions, and phone call function can not be used either.
10
All manuals and user guides at all-guides.com
Press
Hold
During phone call, hold 2 secs to mute/unmute
Charging slot
Internal microphone
Connect to player with supplied 3.5mm audio cable for analogue
signal transfer
ANC on/off
Internal microphone for ANC function
Pairing (BT)
Charging via USB
Audio-In