Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Using the Features
• Range: Press RANGE once to change from autoranging to manual ranging.
The
icon will appear, indicating manual ranging. Press RANGE
RANGE
to select the appropriate measurement range. Press and hold RANGE for
two seconds to return to the autoranging mode. The
disappear from the display.
• Hold: Press HOLD
emit a tone and the display will be held constant until HOLD
again.
• Delay Hold: Press DELAY
a tone, the
HOLD
momentarily and then hold that value on the display. Press HOLD
exit Delay Hold immediately) or press DELAY
after a 6-second delay).
Delay Hold offers more flexibility than Hold. For instance, when measuring
current, use Delay Hold to measure the current after an initial current surge.
• Auto Power Off: The meter will automatically shut itself off after approxi-
mately 10 minutes of inactivity. Press Reset to turn the meter back on.
• Beep Guard™: The beeper will emit a tone if the test lead is plugged into
the µAmA input terminal while the selector switch is not in the µA or mA
position.
All manuals and user guides at all-guides.com
HOLD
-
DC
-
+
AC
Digital Display
and the
HOLD
; after a 6-second delay, the beeper will emit
icon will appear, and the meter will sample the value
RANGE
µmA
µV
MkΩ
RANGE
icon will appear. The beeper will
again (to exit Delay Hold
93-97 / 00220
icon will
is pressed
to
7
Publicité
Table des Matières
