Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
TRACK SEARCH
There are three ways to begin playback on an Audio
CD and MP3 at a specific track.
Using the Number buttons on the remote control
1
Press the Number buttons to enter the
desired Track number.
¡
Playback will start at the selected track.
¡
For single digit tracks (1-9), press a single number
(eg. track 3, press 3).
¡
To play track 26, press +10, 2, 6.
Using the SEARCH MODE button
1
Press the SEARCH MODE button.
¡
The track search display appears.
2
Within 30 seconds, select a desired track
number using the Number buttons on the
remote control.
¡
For single digits press 0 first.
¡
Playback will start at the selected track.
Using the PREV/NEXT ( H G ) buttons
During playback, press the NEXT G button to move
the next track. Press it repeatedly to skip subsequent
tracks. Press the PREV H button to go back to
beginning of the current track. Press it repeatedly to go
to the previous tracks.
¡
If the NEXT G button is pressed while the play-
back is paused, the playback will be paused again
after skipping to the next track.
NOTE
¡
The PREV/NEXT (H G) buttons are not avail-
able when playback is stopped.
TITLE / CHAPTER SEARCH
1
Press the SEARCH MODE button once for
the Chapter search twice for the Title search
during playback.
_/2
2
Enter the desired chapter/title number using
the Number buttons on the remote control.
¡
Playback will start at the selected Chapter or Track.
¡
Press the CLEAR button to erase the incorrect input.
¡
For single digits press 0 first.
All manuals and user guides at all-guides.com
SEARCH FUNCTION
CD
MP3
DVD-V
– 39 –
TIME SEARCH
1
During playback press the SEARCH MODE
button three times (CD: twice) to display the
Time Search on the TV screen.
2
Within 30 seconds, enter a desired disc
time using the Number buttons on the
remote control.
¡
Playback will start at the specified time.
¡
Press the CLEAR button to erase the incorrect input.
¡
When there is no need to enter a number, "0"
appears automatically. For example, " 0 : 0 - : - - "
appears in the Time Search display if the total time
of the disc is less than 10 minutes.
MARKER SETUP SCREEN
Use markers to memorise your favorite places on a
disc.
1
Press the SEARCH MODE button four times
(CD: three times) during playback.
¡
The display screen and Markers will appear on the
TV screen.
2
Press the Arrow button (s/ B) to select 1, 2,
3, 4, 5, 6, 7, 8, 9, or 10 and ensure that " - - -
- : - - : - - " appears in the display.
3
When you reach the desired point press the
ENTER button.
¡
The Title or Track and elapsed playing time will
appear on the TV screen.
4
To return to the Marker later, press the
SEARCH MODE button four times (CD: three
times) during playback and the Arrow but-
ton (s/ B) to choose the desired marker
then press the ENTER button.
NOTES
¡
Opening the disc tray or turning off the power or
selecting AC at step 2 and pressing the ENTER but-
ton will erase all Markers.
¡
To clear a marker using the Arrow button (s/ B),
position the cursor on to the marker number to be
cleared and press the CLEAR button.
¡
You can mark up to 10 points.
5
Press the SEARCH MODE or RETURN but-
ton to exit.
DVD-V
CD
DVD-V
CD
EN
01A11
Publicité
Table des Matières
