Picture Search; Time Search - Magnavox MGTD204 Guide D'utilisation

Make sure ...
•
TV/VCR/DVD power must be turned on.
•
Insert a tape.
ZERO RETURN
This function allows you to search easily a beginning
point that you want to review by rewinding or fast
forwarding.
NOTE:
Zero Return WILL NOT work on a blank tape or a
blank portion of a tape.
1
Stop a tape at your desired point
Rewind or fast forward the tape to the beginning
point at which you want to review.
2
Reset the counter to 0:00:00
Press the C.RESET button repeatedly.
3
Begin recording or playback
Press the RECORD or PLAY button.
Press the STOP button when recording or playback is
completed.
4
To activate "ZERO RETURN" mode
Press the SETUP button on the
remote control.
Press the Arrow button K or L to
point to "ZERO RETURN".
Then press the ENTER button.
The counter will appear on the TV screen.
The tape will automatically stop when the counter
returns to 0:00:00.

PICTURE SEARCH

This feature is very useful in finding or skipping over
a particular scene on a tape. In this mode, the sound
will be muted.
1)You may view a video tape at a high speed in
either a forward or reverse direction by pressing
the F.FWD
or REW
g
back. (in the SP / LP / SLP modes)
NOTE:
•
If you press the F.FWD
on the front panel in the DVD mode, the VCR
forward or reverse will start. Please press the
STOP / EJECT button once to stop it, twice to
eject it.
2)Press it again and the TV/VCR/DVD will now search
in super high speed. (in the LP / SLP modes only)
NOTE:
•
Tapes recorded in the SP or LP mode will dis-
play a noise bar on the TV screen and the picture
may revert to Black and White. This is normal.
3)Press the PLAY button to return to normal speed.
All manuals and user guides at all-guides.com
SEARCH
TV/VCR
- TV/VCR SETUP -
TIMER PROGRAMMING
SETTING CLOCK
CHANNEL SET UP
USER'S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
B ZERO RETURN

TIME SEARCH

INDEX SEARCH
TV/VCR
button during play-
h
or REW button
g h
TIME SEARCH
The Time Search function makes it possible to quick-
ly advance the tape to your desired position simply
by entering the exact amount of playback time you
want to skip.
NOTES:
•
Time Search can be set up to a maximum of 9
hours 50 minutes (9:50) by 10 minutes at a time.
•
This function will not operate in recording mode.
•
This function is not operative when a cassette tape
is not inserted in the TV/VCR/DVD.
In the example below: To watch a program before/
after 2 hour 50 minutes from the present position, in
either direction.
1
Insert a tape
2
Select "TIME SEARCH" mode
Press the SETUP button on the
remote control.
Press the Arrow button K or L to
point to "TIME SEARCH".
Then press the ENTER button.
3
Enter your desired time
Press the Arrow button K or L until
your desired time appears.
(Example: "2:50" stands for 2 hours
50 minutes)
If you wish to cancel the Time
Search at this point, press the SETUP button on the
remote control.
4
Begin Time Search
By pressing the Arrow button s or B, the
TV/VCR/DVD will rewind or fast forward to the
specified point.
The time counts down as the searching progresses.
When 0:00 is reached, the tape will start playback
automatically.
TO CANCEL THE TIME SEARCH at this
point
Press the STOP/EJECT button on the TV/VCR/DVD
or the STOP button on the remote control. This will
delete the selected time.
- 28 -
TV/VCR
- TV/VCR SETUP -
TIMER PROGRAMMING
SETTING CLOCK
CHANNEL SET UP
USER'S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
B TIME SEARCH
INDEX SEARCH
TIME SEARCH
2 : 50
EN
1C29