Watching A Tv Program; Picture Control - Magnavox MGTD204 Guide D'utilisation

WATCHING A TV PROGRAM

1
Turn on the TV/VCR/DVD
Press the POWER button to turn on the TV/VCR/DVD.
2
Select the channel number
Press the CHANNEL button K or L to select your
desired channel number or press the number on the
remote control.
Note for using the Number button on the remote
control:
¡ You must precede single-digit channel numbers
with a zero (For example: 02, 03, 04 and so on).
¡
When selecting cable channels which are higher
than 99, press +100 first, then press the last two
digits. (Example: to select channel 125, first press
"+100" then press "2" and "5").
Remember: If the TV/VCR/DVD is connected to a
cable box or satellite box, the TV/VCR/DVD must
be on CH3 or CH4, then the channel to be viewed
must be selected on the cable box or satellite box.
3
Adjust sound
Press the VOLUME button X X or Y Y
to adjust the volume.
NOTES:
•
If you press the CHANNEL button K or L in the
DVD mode, you can change the TV channels.
Even if you turn off the TV/VCR/DVD in the
DVD mode, when you turn it on again, it will go
into the TV/VCR mode.
DEGAUSSING
Magnetism from nearby appliances and speakers
might affect the color of the TV picture.
If this happens, move this TV/VCR/DVD away from
the appliance. If the color is still not correct, unplug
the power cord, then plug it in again 30 minutes later
or so.
All manuals and user guides at all-guides.com
TV OPERATION
TV/VCR
VOLUME 20
C C C C C
C C C C C C C
TV/VCR
- 19 -

PICTURE CONTROL

The TV/VCR/DVD's picture controls – BRIGHT,
CONTRAST, COLOR, TINT and SHARPNESS –
are preset to factory specifications. Although they are
usually the best, you may need to make some further
adjustments for a more natural looking image.
NOTES:
•
Procedures must be followed within 5 seconds or
the Picture Control mode will be cancelled.
•
When setting the Picture Control, the Game mode
will be cancelled.
Make sure ...
•
TV/VCR/DVD power must be turned on.
1
Select "PICTURE CONTROL"
Press the PICTURE button on the remote control.
2
Select item you want to adjust
Press the Arrow button K or L until desired control
is displayed.
BRIGHT
CONTRAST
COLOR
TINT
SHARPNESS
3
Adjust the picture control
Press the Arrow button s or B to adjust to your
desired level.
Arrow Button {
to decrease
BRIGHT
brightness
to decrease
CONTRAST
contrast
COLOR to pale
to purple
TINT
to soft
SHAPNESS
•
If there is a power failure of any kind, the
TV/VCR/DVD will retain its memory for this fea-
ture.
TV/VCR
BRIGHT
– P P P P P P P P P P P P P P C C P P P P P P P P P P P P P P +
Arrow Button B
to increase
brightness
to increase
contrast
to brilliant
to green
to clear
EN
1C29