Connecting/Disconnecting - Panasonic CF-VEB531 Instructions D'utilisation

Connecting/Disconnecting

CAUTION
Do not connect or disconnect the port replicator while the computer is powered on or
*1
in the sleep or hibernation mode.
1
* Windows XP: standby
Connecting
1
Power off the computer, disconnect all cables from
the computer, and close all connector covers.
2
E
Connect the plug of the AC adaptor that came with
the computer to the DC-IN jack of the port replica-
tor and plug the other end into an AC outlet.
CAUTION
Refer to the "Operating Instructions" accompanying computer for
information on proper handling of the AC adaptor and AC cord.
3
Slide the computer onto the port replicator, align
the back of the computer with the rear of the port
replicator, and then slowly lower the computer to
connect the expansion bus connector.
CAUTION
Do not connect the computer to a port replicator while the computer is
connected to the AC adaptor or other cables.
Do not attempt to make connections if there is any object between the
computer and the port replicator. Doing so could damage the computer and
the port replicator.
10