Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
AUXILIARY USE
AUX 1 : Drivers side sliding door (if installed)
AUX 2 : Passenger side sliding door (if installed)
Note : The function of the auxiliary outputs may vary depending on the vehicle and the installation.
In most cases these outputs are not used, and in some cases they may be used to control other
features such as the power windows, sunroof, or heated seats. Check with the installer to fi nd out
what AUX outputs have been installed, and what they control.
REMOTE BUTTON ENABLE AND DISABLE
REMOTE STARTING OPTIONS
CONFIGURABLE FONCTIONALITY DURING INSTALLATION
This Remote-Starter is designed to be highly fl exible when integrating into original equipment
(OEM). With the following programmable options the Remote-Starter/Alarm can control most
electronic systems within the vehicle.
WARNING :
THIS REMOTE-STARTER MUST BE INSTALLED BY A TRAINED PROFESSIONAL. IMPROPER MODIFICATIONS
TO ANY OF THE FOLLOWING SETTINGS COULD ADVERSELY AFFECT THE RELIABILITY OF THE REMOTE-
STARTER AND/OR THE VEHICLE'S OPERATION.
CONFIGURABLE OPTIONS :
Remote Door Locks
Security Lock
Runtime Reset
Press and release the FUNCTION button (the remote LED
fl ashes slowly white) within 12 seconds press the button
LOCK button.
Press and release the FUNCTION button (the remote
LED fl ashes slowly white) within 12 seconds press the
UNLOCK button.
LOCK THE REMOTE
UNLOCK THE REMOTE
Active or Passive Arming
Trunk / Hatch Release
Secure Transmitter Mode
To disable all the buttons on the remote :
Press and release the FUNCTION button, within
12 seconds simultaneously press the LOCK and
buttons until the RED LED comes on.
FUNCTION
The RED LED will come on whenever a button is
pressed when the remote is LOCKED.
To enable the buttons on the remote : Press and
release the FUNCTION button, within 12 seconds
simultaneously
press
FUNCTION buttons until the GREEN LED comes
on.
Page 14 / 19
and
the
LOCK
Ignition Door Locks
Runtime
and
Publicité
Chapitres
Table des Matières
