Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Setting SYSTEM and FAN Switches (T8775C only)
•
System and Fan settings are controlled by using SYSTEM
and FAN switches located on the top of the thermostat (see
Fig. 1).
IMPORTANT
Do not operate the T8775C in cooling mode when the
outdoor temperature is below 50°F (10°C), or damage
to compressor could result.
SET THE SYSTEM SWITCH:
Heat:
The thermostat controls your heating system.
Off:
Both heating and cooling systems are off.
Cool:
The thermostat controls your cooling system.
SET THE FAN SWITCH:
Auto: Normal setting for most homes. The fan only runs
with the heating and cooling system.
On:
The fan runs continuously. Use for improved air
circulation.
Operating Your Thermostat
NOTE:
Batteries are not required because the temperature
setting is held permanently in memory.
3
69-1679EF—03
Publicité
Table des Matières
Dépannage
