5
5
Put the exfoliation brush onto
your skin and begin exfoliation.
• We recommend using on legs, arms
(especially elbows and knees) and
neckline.
Do not use on sensitive areas of skin
or face.
• Do not continue to hold in one place.
Slide over skin in a circular pattern.
• Apply to the same area of skin for
approximately 30 seconds each time,
check your skin and adjust usage
accordingly.
6
6
Moisturize by applying a moisturizer that suits
your skin on the area where the exfoliation brush
was used.
Cleaning
• Always clean the heads and caps after use to keep them in a
hygienic state.
• Switch off and unplug the appliance before cleaning.
• Take care not to damage the skin protector, the frame, the fast
cap and the gentle cap during cleaning.
Dry cleaning [BCDF]
Epilation head
1. Lift fast/gentle caps, the
frame upward while holding
the cap release rib [BC2]/
the frame release rib [F6].
ES-ED64_AM.indb
15
All manuals and user guides at all-guides.com
2. Clean the gentle cap [C], the
Wet cleaning [BCDFH]
1. Wet the discs, and then apply liquid hand
2. Turn the switch on and then foam is
3. Wash the head with water to wash out hair.
4. Turn the switch off, wipe the appliance with a dry cloth
epilation head [D, F] with the
cleaning brush [K].
Epilation head
soap.
created.
• Do not use hot water.
• If soap is not completely washed away, then a
white deposit can accumulate and prevent the
discs from moving smoothly.
and dry it well.
15
2014/03/03
9:31: