Safety Guidelines - Definitions; All Rights Reserved; Chainsaw Specifications - Westinghouse CSA40 Mode D'emploi

SAFETY GUIDELINES - DEFINITIONS

It is important to read and understand this manual. The information it contains
relates to protecting YOUR SAFETY and PREVENTING PROBLEMS. The
symbols below are used to help you recognize this information.
DANGER: Indicates an imminently hazardous situation which, if not avoided
will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not avoided,
may result in minor or moderate injury.
NOTICE: Used without the safety alert symbol indicates potentially hazardous
situation which, if not avoided, may result in property damage.
DISCLAIMERS:
All information, illustrations and specifications in this manual are based on
the latest information available at the time of publishing. The illustrations
used in this manual are intended as representative reference views only.
Moreover, because of our continuous product improvement policy, we may modify information, illustrations and/or
specifications to explain and/or exemplify a product, service or maintenance improvement. We reserve the right to
make any change at any time without notice. Some images may vary depending upon which model is shown.

ALL RIGHTS RESERVED:

No part of this publication may be reproduced or used in any form by any means – graphic, electronic or
mechanical, including photocopying, recording, taping or information storage and retrieval systems – without the
written permission of Westinghouse Outdoor Power Equipment.
DANGER: This manual contains important instructions for operating this product. For your safety and the safety
of others, be sure to read this manual thoroughly before operating the battery/charger. Failure to properly follow all
instructions and precautions can cause you and others to be seriously hurt or killed.

CHAINSAW SPECIFICATIONS

Part
Model Number
Westinghouse CSA40
40V Cordless
14" Brushless
Chainsaw
CHAIN AND BAR INFORMATION
Manufacture
Oregon
®
Oregon
®
WHERE IS MY SERIAL NUMBER? Serial number on
this product is located under handle.
2
Chain No-load
Motor Speed speed
40V DC 19 m/s 5500 RPM
Saw Chain
90PX052X
90PX056X
Some dust created by this product
contains chemicals known to the
State of California to cause cancer,
birth defects or other reproductive
harm. Some examples of these
chemicals are:
• compounds in fertilizers
• compounds in insecticides,
herbicides and pesticides
• arsenic and chromium from
chemically treated lumber
To reduce your exposure to these
chemicals, wear approved safety
equipment such as dust masks that
are specially designed to filter out
microscopic particles.
Bar Oil
Tank
Bar Size Size
14 in 200 ml
Guide Bar
577293E7
112329K790
WHAT COMES WITH TOOL
• Main handle
• Oregon
• 14 in Oregon
• Chain bar cover
• 250 ml of chain bar oil
• Warranty
• Manual
WARNING
Chain Works with
Bar Battery
14 in LBA40120
Oregon LBA40125
®
LBA40240
Chain bar
®
Chain
®