Publicité
7.Connect the gas hose and regulator using clip
and tighten with screwdriver.
Attach the regulator to the gas cylinder and
tighten with wrench.
WARNING! Ensure the hose does not
contact any high temperature surfaces,
or it may melt and leak causing a fire.
LEAK CHECK
WARNING!
of the gas system is replaced.
WARNING!
in the area while you check for leaks. Sparks or open flames will result in a fire or explosion, damage to
property, serious bodily injury, or death.
of the regulator, hose, manifolds and valves. (As step 6 where arrows show )
If the leak cannot be stopped, immediately shut off the gas supply,
Never use an open flame to check for gas leaks. Be certain no sparks or open flames are
Hose / Regulator
2 7
Regulator / Cylinder
Page 12
2022-2023
Publicité
