"Pair" To Your Bluetooth Phone; Basic Operations; Turning Headset On/Off - Jabra FREESPEAK 250 Manuel

4

"Pair" to your Bluetooth phone

Pairing 3 will create a unique and encrypted wireless link between two Bluetooth-
enabled devices such as your Bluetooth phone and JABRA FreeSpeak 250.
1. Ensure the headset is off (see Turning
headset on/off section).
2. Press and hold until you see a solid
blue light (approximately 8 seconds),
then release* (see Fig. 2).
3. Set your Bluetooth phone to "discover"
the headset by following your phone's
instruction guide. Typically, the steps
involve going to a "setup" , "connect" , or
"Bluetooth" menu on your phone and
then selecting the option to "discover" a
Bluetooth device.
4. Your phone will find the "JABRA 250"
headset and ask if you want to pair with
it. Confirm this by pressing "yes" or "ok" .
5. Enter passkey or PIN 4 = 0000 (4 zeros),
then press "yes" or "ok" .
IMPORTANT: If pairing was successful, the blue indicator light will briefly flash rapidly
before going back to flashing every 3 seconds. If unsuccessful, the light remains solid,
and you'll need to reattempt pairing (see steps 3–5 above).
* If you have a Bluetooth phone that supports the hands-free Bluetooth profile,
see Enhanced features section for alternative pairing instructions. Phone-
specific pairing instructions can be found online at www.jabra.com/fscs
6
All manuals and user guides at all-guides.com
Fig. 2
Fig. 3

BASIC OPERATIONS

5

Turning headset on/off

What you do
Turning
Press and hold for 3 to 5
headset on
seconds until you see a
burst of flashes on the blue
indicator light, then release
Turning
Press and hold for 3 to 5
headset off
seconds until you see a
burst of flashes on the blue
indicator light, then release
Status indicators
What you see What you hear
Flashes every Quick series of 2 tones –
second low to high pitch (when
active mode starts)
Flashes every Quick series of 2 tones –
3 seconds high to low pitch (when
standby mode starts)
3 flashes every 3 beeps every 30 seconds
second
3 flashes every 3 3 beeps every 5 minutes
seconds
*
Depending on phone type and usage.
IMPORTANT: Do not hold the button down for more than 3 to 5 seconds when
turning the headset on or else it may go into pairing mode, and the blue indicator light
will turn solid. If that happens, turn off the headset, wait 3 to 5 seconds, and repeat
process for turning the headset on.
What you hear What you see
Ascending The blue indicator
(low-to-high) light will flash while
tones the power is on (see
Status indicators
table below)
Descending The blue indicator
(high-to-low) light will stop
tones flashing
Status
Active Mode 5
•
Call in progress
•
Up to 8 hours of talk-time*
Standby Mode 6
•
Waiting for call
•
Up to 240 hours of
standby time*
Low Battery (in active mode)
•
3 – 5 minutes of talk time left
Low Battery (in standby mode)
•
3 – 5 minutes of talk time left
7