Safety Instructions - Omnitronic PA-240 Mode D'emploi

OPERATING INSTRUCTIONS
PA 240 amplifier
For your own safety, please read this user manual carefully before you initial start-up.
All persons involved in the installation, operation and maintenance of this device have to:
- be qualilfied
- follow the instructions of this manual
INTRODUCTION
Thank you for having chosen a OMNITRONIC PA 240. You have acquired a reliable and powerful device. If
you follow the instructions given in this manual, we can assure you that you will enjoy this device for many
years.
Unpack your OMNITRONIC PA 240.
Please make sure that there are no obvious transport damages. Should you notice any damages on the A/C
connection cable or on the casing, do not take the device into operation and immediately consult your local
dealer.

SAFETY INSTRUCTIONS

This device has left our premises in absolutely perfect condition. In order to maintain this condition and to
ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning
notes written in this user manual.
Important:
Damages caused by the disregard of this user manual are not subject to warranty. The dealer will
not accept liability for any resulting defects or problems.
Keep away from rain and moisture!
Never expose the device to agressive chemicals, detergents, etc!
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on
immediately. The arising condensation water might damage your device. Leave the device switched off until it
has reached room temperature.
Make sure that the available voltage is not higher than stated on the device.
The device and all connections have to be lightning protected.
Only connect the device when the power switch is off.
All manuals and user guides at all-guides.com
English
7