Twin-Star International 28WM426 Manuel D'instruction page 4

4. Insert one Wood Dowel (N) into each of
the Pre-drilled holes on the top edge of
the front Assembly from step 3. Then
attach Center Front Panel (D) to the front
assembly. Insert Bolts (L) and washers
(M) into the holes in the mounting blocks.
HAND TIGHTEN ONLY.
5. Locate Left Side Panel (E), and insert one
Wood Dowel (N) into each of the
pre-drilled holes. Then use Bolts (L) and
Washers (M) through the pre-drilled
holes in the mounting blocks. Attach the
Side Panel to Hearth/Base (A) and the
completed front assembly.
HAND TIGHTEN ONLY.
6. Locate Right Side Panel (F), and insert
one Wood Dowel (N) into each of the
pre-drilled holes on the bottom edge of
the panel. Slide into place, and attach to
Hearth/Base with Bolts (L) and Washers
(M) through the pre-drilled holes in the
mounting blocks. Then attach to
completed front assembly using Bolts
(L) and Washers (M).
HAND TIGHTEN ONLY.
All manuals and user guides at all-guides.com
N
M
L
F
Center Front Panel
D
C
Completed
Assembly
Right
Side
Panel
N
M
L
B
Left
Side
Panel
E
M
L
L
M
N