Publicité
Les langues disponibles
Les langues disponibles
User Manual
Introduction
Thank you for purchasing the LINDY 2 or 4 Port 4K UHD HDMI Splitter. This device is a high
performance HDMI amplifier and video & audio splitter which allow one HDMI source to be
displayed simultaneously on 2 or 4 different displays with the ability to cascade multiple units.
With the added function HDCP on every port, it makes the splitter the ideal solution for a
3D/UHD home cinema installation.
Package Contents
• LINDY 2 or 4 port HDMI 4K UHD Splitter
• 5V DC multi country power supply
• This manual
Features
• HDMI 1.4a compliant
• Full 3D support
• Supports uncompressed video up to 3840 x 2160 @ 30Hz
• Support LPCM 7.1Ch, Dolby TrueHD and DTS-HD Master audio
• Fully HDCP 1.3 compliant
• Each input and output can support up to 10m, a total of 20 metres
• 12 bit deep colour
• Up to 300Mhz bandwidth
Operation
Make sure all devices are switched off before making any connections! Once all the
connections have been made, switch on the devices in this order: displays, HDMI Splitter,
source device. Connect the source device such as a DVD player or games console to the HDMI
splitter's input port.
1. HDMI output ports 1, 2, 3 & 4
2. HDMI input port
3. USB Port – firmware update
port only
4. EDID Switch – default setting is
TV. Switch to STD to use the
built in EDID if you have
problems with your display
5. Sync LED – this will be lit when
a HDMI signal is detected on
the HDMI input port
6. Power LED – this will be lit
when the power is switched on
7. PSU Port – connect the
included PSU to this port
All manuals and user guides at all-guides.com
1
3
English
5
6
2
4
7
Publicité
