Cd / Usb; Bt (Nur 10029363 & 10029364) - oneConcept V-15 Mode D'emploi

EN
24
All manuals and user guides at all-guides.com

CD / USB

• Press On / Standby to switch the device on, then press MODE for the CD
mode or USB mode.
• Press OPEN/CLOSE to open the CD tray and insert a CD with the printed
side facing to- wards you. CDs will be read in automatically. Insert USB
drives with music files into the USB slot on the top of the device.
• Control playback with
• For MP3 CDs or USB drives with folders: use the RIGHT/LEFT buttons (7 /
17) to toggle folders.
Play Mode
Press PLAY MODE to select one of the following play modes: REPEAT 1
(current track is repeated), REPEAT ALL (all contained tracks are repeated),
RANDOM (all tracks are played in random order). A corresponding icon is
shown on the display. Press PLAY MODE again to return to normal playback.
Program Mode
You can program a play list with up to 20 entries. Stop playback with and
press MEM. Press
Repeat this procedure up to 20 times and start playback with
BT (NUR 10029363 & 10029364)
The BT function can be used to stream music from your smartphone /
Tablet, but does not allow the use as a hands-free kit.
• Turn on the power and press MODE to select BT mode.
• Activate BT on your BT device and connect to V-15.
• Control media playback from your external device or with the buttons
/ / / .
• Enter „0000" if you are prompted to enter a password.
The unit automatically connects to the last connected BT device. To pair, press
and hold PAIR for 3 seconds. The BT LED flashes quickly: the unit is in pairing
mode.
/ / / .
/ to select the desired title and press MEM again.
.