Setting Recommended Use; Using The Oven - Dometic R31 Série Manuel D'installation

Extinguishing The Burner Flame
FIG. 1
• Turn the knob clockwise until it points to the
solid circle at the top of the knob.

6.4 Using The Oven

Setting The Oven Pilot
STEP 1
STEP 2
13
Range Or Slide-In Knob Settings
Setting
I
After top burners have been on for a period of
time, a popping sound may occur when the
burner is turned off. This is normal and does
not create a safety hazard.
Top Burner Models
• For top burner models, push in and rotate the
oven control knob until it points to pilot - push/
hold.
• Push in and hold the knob while holding a lit
match under the oven pilot located at the back
of the oven, under the broiler shelf.
Piezo Ignitor Models
• For models with the Piezo Ignitor, push in and
rotate the oven control knob until it points to
pilot - push/hold.
• Turn the spark ignitor knob clockwise until it an
audible click is heard. Continue to repeat this
step until the burner ignites.
All Models
• Release knob and verify that the pilot stays lit.
Repeat the process if the pilot does not stay lit.
• The oven pilot has been factory set and requires
Pilot
no further adjustment.
• To extinguish the oven pilot, push in the oven
control knob and rotate clockwise to off.
RANGE AND SLIDE-IN
Recommended Use
• Light the burner
• Start food cooking
• Bring liquids to a boil
• Hold liquids at a boil
• Cook food at different temperature
levels
• Keep food warm
• Turn the burner off
EN