Power Fist 8102048 Manuel Du Propriétaire page 2

This water pump is ideal for agricultural, industrial, construction, fisher and garden use. Please read the operation
manual before use to ensure the proper handling and operation. Follow the instructions carefully to keep your
machine in the best running condition, which will prolong its life span.
Specifications
Model:
Suction port diam.:
Max displacement:
Rated displacement:
Max head:
Rated head
Self-priming time (13 ft)
Max suction head
Rated power:
Displacement:
Fuel tank
Weight
Outside dimensions
Construction
Water pump consists of gasoline engine and pump kit. The pump is fixed on a frame with a roll bar design.
The self-priming pump consists of a pump body, cover, flow guidance, impeller and seals. Shaft sealing is a
machinery type seal and the pump inlet is higher than the impeller inlet allowing it to self prime with only water
filling the body of the pump. The pump inlet is fixed with a one-way valve to prevent liquid from siphoning back
into the water from the pump body after stopping. It stores enough liquid in the pump body for the next start.
The self-priming pump's flow guidance and impeller are cast iron.
Operation
1. The coupling of suction pipe to the pump must be tight, reliable and without any leaks.
2. Install a filter screen on the suction pipe inlet to protect impurities from being sucked into the pump and
sticking or damaging the impeller.
3. Prime the pump until water overflows.
4. Do not run pump at high speed until after priming.
5. Drain the pump for storage
All manuals and user guides at all-guides.com
8100248
2"
9,510 GPH
5,812 GPH
85.3 ft
49.2 ft
70 secs
26.2 ft
3.2 kw/3,600 RPM
0.043 gal.
0.95 gal
53.4 lbs
17.5" x 14.8" x 15"
8100255
3"
13,208 GPH
9,510 GPH
82 ft
42.7 ft
120 secs
26.2 ft
3.2 kw/3,600 RPM
0.043 gal.
0.95 gal
58 lbs
510" x 375" x 443"