Cleaning The Water Dispenser - ETNA KCV178NRVS Mode D'emploi

MAINTENANCE
When you are not going to use the appliance for a longer period then switch it off and
disconnect it from the mains. Empty, defrost and clean the appliance, and leave the door
ajar.

Cleaning the water dispenser

Switch off the appliance and remove the plug from the socket before you start cleaning it.
1. Carefully remove the water tank from the door.
2. Unscrew the head from the water tank.
3. Clean the parts with water and dry them well.
4. Screw the head back onto the water tank.
5. Replace the water tank. Pay attention to the guides on the door.
EN 28