Air Quality Indicator - Rabbit Air MinusA2 Manuel D'utilisation

Mood Light and Ion on/off
• Short Press:
Turns the Mood Light on or off. The color of the Mood Light corresponds
to the current mode of operation.
Manual Speed: Blue
Auto Mode: Blue
Pollen Mode: Mood Light cycles from blue - purple - light purple - pink
– Press and Hold:
Turns the Negative Ion Generator on or off.
Light Sensor (Sleep Lighting)
The Light Sensor will detect if the room is dark and activate Sleep
Lighting after three minutes of darkness.
While the air purifier is operating is Sleep Lighting, the Mood Light and
Air Quality Indicator will be turned off. If the unit was operating in Auto
Mode, the fan speed of the air purifier will automatically adjust to Silent
Speed, minimizing energy consumption and noise.
Sleep Lighting will not override the fan speed if the MinusA2 was operat-
ing in one of its Manual Speed or Pollen Mode.

Air Quality Indicator

This light indicates the current air quality in the room as detected by the
Odor Sensor and Particle Sensor. The color will shift from blue (good) -
purple - light purple - red (poor), depending on the amount of contami-
nants detected.
Operation Tips
The MinusA2 can be used for various air quality improvement reasons. For
recommendation on the right speed and mode for you, please contact our
knowledgeable Customer Care Team at 888.866.8862
11
Connecting with your smart phone or tablet
Requires iOS or Android device and a 2.4Ghz WiFi network
1. Download the Rabbit Air app to your smart phone or tablet.
2. Use your existing customer login or create a new account.
3. Select "Setup new purifier" or "Find existing purifier" and follow the steps on the
screen.
4. Now you can monitor your air quality and control your air purifier remotely.
For more information, contact us at www.rabbitair.com/wireless.
Changing the Sensitivity Level of the Sensors
You can adjust the sensitivity level of the air quality sensors.
The sensors come preset at a standard sensitivity level as a default.
1. Press and hold both the Speed and Mode button for three seconds.
2. The Air Quality Indicator and Auto Mode Indicator will blink.
3. Press the Speed button to choose the sensitivity level.
Replace Filters : Low sensitivity
Pollen Mode : Standard sensitivity
Auto Mode : High sensitivity
4. Press and hold the Speed and Mode buttons for
three seconds to save the sensitivity level. If no action
is taken for ten seconds, the sensitivity level you last
selected is saved automatically.
Speed
Silent
Pollen
Mode
Auto
Medium
Replace
Low Low
Filters
Speed
Standard
Pollen
Replace
Filters
High Pollen
Auto
Mode
Auto
Filter
Speed
Silent
Pollen
Mode
Auto
12