Rabbit Air MinusA2 Manuel D'utilisation page 6

9
Fan Speed
Filter Replacement
Indicator
Auto or Pollen Mode
Negative Ion on/off
Power Button
Wireless Connection Status
Light Sensor
Air Quality Indicator
Mood Light
Odor Sensor
Air intake around
front panel
Control Panel / Operation Modes
Speed and Wireless Reset
• Short Press:
Changes to a manual fan speed. The manual fan speed changes in the
following order as you press this button:
Silent - Low - Medium - High - Turbo.
– Press and Hold:
Initiates or resets wireless setting to connect air purifier to a 2.4 GHz
wireless network using a mobile device. Please download the Rabbit
Air App from the Apple Store (iOS) or Google Play Store (Android) to
your device and follow instruction for setup.
The Wireless Indicator will flash during setup and remain illuminated
once it is connected to the network. See page 12 for more info.
Mode and Filter Reset
• Short Press:
Changes the mode of operation to Auto Mode or Pollen Mode.
Pollen Mode: Fan speed will adjust according to the air quality
detected. The color of the Mood Light will slowly cycle from blue -
purple - light purple - pink.
Auto Mode: Fan speed will adjust according to the air quality
detected unless air purifier is in Sleep Lighting. While the air
purifier is in Sleep Lighting, the fan speed will remain in Silent
Speed. The Mood Light will be solid blue.
– Press and Hold:
Resets Filter Replacement Indicator. The Replace Filters Indicator will
illuminate when it is time to change your filters. Once you have
replaced the filters, press and hold the button until the Replace Filters
Indicator turns off.
10