Specific Safety Rules - Power Fist 8643413 Manuel D'utilisateur

8643413
TOOL USE AND CARE
1. Use the correct product for your application. The correct product will do the job better
and safer at the rate for which it is designed.
2. Do not use the power product if the Power Switch does not turn it on or off. Any
product that cannot be controlled with the Power Switch is dangerous and must be
replaced.
3. Disconnect the Power Cord Plug from the power source before storing the tool.
4. Store idle products out of reach of children and other untrained persons. Products are
dangerous in the hands of untrained users.
5. Maintain products with care. Keep products clean. Do not use a damaged product. Tag
damaged products "Do not use" until repaired.
6. Check for misalignment or binding of moving parts, breakage of parts, and any other
condition that may affect the product's operation. If damaged, have the product
serviced before using. Many accidents are caused by poorly maintained products.
SERVICE
1. Product service must be performed only by qualified repair personnel. Service or
maintenance performed by unqualified personnel could result in a risk of injury.
2.
When servicing a product, use only identical replacement parts. Follow
instructions in the "Inspection, Maintenance, And Cleaning" section of this
manual. Use of unauthorized parts or failure to follow maintenance instructions may
create a risk of electric shock or injury.

SPECIFIC SAFETY RULES

1. Maintain labels and nameplates on the Air Filtration System. These carry important
information. If unreadable or missing, contact the seller for a replacement.
2.
Always wear safety impact eye goggles when mounting or performing maintenance
on the Air Filtration System. Using personal safety devices reduces the risk for injury.
3. Maintain a safe working environment. Keep the work area well lit. Make sure there
is adequate surrounding workspace. Always keep the work area free of obstructions,
grease, oil, trash, and other debris. Do not use a power product in areas near
flammable chemicals, dusts, and vapors. Do not use this product in a damp or wet
location.
4.
If placing this 3-SPEED AIR CLEANER on a table or shelf, make sure that the
machine is placed securely on a flat, level surface, capable of supporting the
weight of the machine.
5. If attaching the Air Filtration System to a ceiling, make sure the machine is
attached securely to joists capable of supporting the weight of the machine.
6.
Make sure the Switch is in the "Off" position before plugging in the power cord.
7. Keep the Filter Net (1) and the Filter Bag (2) clean, in place, and in good working
order.
8. Always unplug the 3-SPEED AIR CLEANER from its electrical outlet before
performing any inspection, maintenance, or cleaning procedures.
WARNING! People with pacemakers should consult their physician(s) before using this
product. Operation of electrical equipment in close proximity to a heart pacemaker could
cause interference or failure of the pacemaker.
Visit www.princessauto.com for more information
1,044 CFM Air Cleaner V4.0
5