Beper BP.604 Manuel D'instructions page 6

Blender Use instructions
This appliance is for household use only.
To protect against electric shock, do not immerse cord, plug or any
parts of the appliance into water or other fluids.
Do not use the appliance near explosives, highly flammable mate-
rials, gases or burning flames.
Do not allow children, disabled people or every pe-
ople without experience or technical ability to use
the appliance if they are not properly watched over.
Close supervision is necessary when any appliance
used by or near children.
Description Fig.A
1. Lid
2. Gratuated jar 500 ml
3. Stainless steel blades
4. Security closure system
5. Motor unit
6. Switch on/off
7. Cord supply
8. Non-skid feet support
Instructions for use
Before using the blender for the first time, completely remove the packing.
Place the blender on a stable and horizontal surface ; the non-skid feet support (9) will allow to keep it fixed on
the table.
Put the graduated jar (2) on the motor unit (5); turn clockwise to fix it on the motor unit. The blender only works
if the graduated jar is correctly fix on the motor unit, this is the security closure system (4).
Cut the food in pieces and put them into the graduated jar (2) until maximum level (indicated on the jar).
Close the jar with the lid (1).
Plug the cord supply (7) to the socket.
Press on (6) to make the blades move (3).
Respect a continuous time of max. 30 secondes when the blender is working.
Do not put fingers or other objects into the jar or near to the blades when the blender is working.
When finished, switch off the blender with switch on/off (6) and unplug from the socket.
Cleaning
Before cleaning, unplug the plug from the socket.
Do not immerge the motor unit into water and do not let under water spray. Clean the motor unit with a soft wet
cloth.
Clean all the other parts (jar, lid, cap) with water and detergent and dry all the parts.
Do not use abrasive products, metallic sponge that could damage the blender.
Before storing the blender, make sure every parts are dry.
Keep the blender in a dry and clean place.
Technical data
Power : 200-300W
Power supply. 220-240V ~ 50-60Hz
For any improvement reasons, Beper reserves the right to modify or improve the product without any
notice.
6